|
|
||||||||||||||||||||||||||
'
對照下表查看27*13.5*不同自由高度單價，聯系客服下單
黃色TF27*13.5*自由高度 | |||
外徑 | 內徑 | 高度 | 單價 |
27 | 13.5 | 25 | 4.8 |
27 | 13.5 | 30 | 5.2 |
27 | 13.5 | 35 | 5.6 |
27 | 13.5 | 40 | 6.2 |
27 | 13.5 | 45 | 6.7 |
27 | 13.5 | 50 | 7.1 |
27 | 13.5 | 55 | 7.6 |
27 | 13.5 | 60 | 8.3 |
27 | 13.5 | 65 | 8.5 |
27 | 13.5 | 70 | 9 |
27 | 13.5 | 75 | 9.5 |
27 | 13.5 | 80 | 10 |
27 | 13.5 | 90 | 10.5 |
27 | 13.5 | 100 | 12.1 |
27 | 13.5 | 125 | 15 |
27 | 13.5 | 150 | 17 |
27 | 13.5 | 175 | 18.7 |
材料：模具彈簧選用高應力，高速振幅，耐熱性優良，疲勞壽命長的合金鋼材料。
Material: the mould springs are made by the alloy steel of higher strain、higher amplitude、heat resting、long-time used.
特點：
Point:
一、 材料形狀：呈矩形截面圓角圓邊形狀，與一般矩形直角直邊的有顯著區別，彈簧在高頻率工作時可以減少應力集中，提高使用壽命。
One: Shape of material: Appear as the rectangular section round edge shape which different to the rectangular cartesian straight edge. The stress concentration will be reduced when the springs are working frequently, and also raise the time of using.
二、 強化處理：彈簧經過表面強化處理，其表面組織結實，提高了應力集中點的強度，使彈簧疲勞壽命延長，對高應力，高頻率有特殊效果。
Two、Surface peening :After the treatment on each spring, both of the surface tissue and the stress concentration point will be more stronger, and also extending the using time, especial for the higher stress and higher frequency condition
三、 強壓處理：每只彈簧做三次或三次以上強壓處理，消除了使用前的內應力，保證彈簧使用時不會發生變形，縮短，斷裂等現象。
Three、Prestressing : Each spring will be prestressed by three or more times, in order to reduce the internal stress before using, keep sure that there will not be any crushed, shorten or broken appeared.
四、 使用壽命：根據彈簧的行程長度，頻率來決定。
Four、Using times: Decided by the actual working condition, such as working length and the frequency.
| 100萬次 1Million time | 50萬次 0.5Million time | 30萬次 0.3Million time | 最大變形量 Max.deflection |
TF較小負荷 | 40% | 45% | 50% | 58% |
TL輕負 荷 | 32% | 36% | 40% | 48% |
TM中負荷 | 25.6% | 28.8% | 32% | 38% |
TH重負荷 | 19.2% | 21.6% | 24% | 28% |
TB特重負荷 | 16% | 18% | 20% | 24% |
五、公差范圍：
外徑 Outer-Dia | 內徑 Inner-Dia | 自由長度（L）Free-Lenth | 剛度 Load | |
0—50mm | 50—300mm | |||
+0mm -0.7mm | +0.7mm +0.1mm | +0.5mm | +1% | +10% |
六、 根據不同模具對彈簧特性（負荷）的不用使用要求，共分六種系列，分別采用電泳或者噴塑加工區別（色標）方便選擇使用
Six：the mould springs are distinguished by the load to six color class.
種類Description | 代號Model | 顏色Color |
較小負荷 Lightest Load | TF | 黃色Yellow |
輕 負荷Smaller Load | TL | 藍色Bule |
中 負荷Medium Load | TM | 紅色Red |
重 負荷Heavy Load | TH | 綠色Green |
特重負荷Super Load | TB | 咖啡色Coffee |
'
